SHOTTING CAPACITY GUIDE:
(Approximate as all float’s vary)
- 0.15g = 7x No12
- 0.15g = 4x No11
- 0.2g = 7x No11
- 0.2g = 4x No10
- 0.3g = 6x No10
- 0.4g = 7x No9
- 0.4g = 5x No9, 3x No10
- 0.5g = 6x No8, 2x No10
- 0.5g = 5xNo8, 2x No9
POLE RIG LENGTHS:
(Using a Matrix MTX pole and Matrix pole winders)
Top 2 Kit (2.6m)
- 23cm (Navy/Purple winders) = 10 turns
- 18cm (Yellow winders) = 15 turns
- 13cm (Blue winders) = 20 turns
Top 3 Kit (4.1m)
- 23cm (Navy/Purple winders) = 16 turns
- 18cm (Yellow winders) = 23 turns
- 13cm (Blue winders) = 33 turns
Top 4 Kit (5.5m)
- 23cm (Navy/Purple winders) = 21 turns
- 18cm (Yellow winders) = 31 turns
- 13cm (Blue winders) = 44 turns
NUMBER OF FLOAT RUBBERS ON FLOAT STEMS:
(Always use a longer bottom rubber, slightly overlapping the end of the stem)
- Short and medium carbon stems = two rubbers
- Long carbon and short wire stems = three rubbers
- Medium and long wire stems = four rubbers
Hope this helps. Please credit and let me know if it’s of use!
🙂
Also check out my Styl Capacity Conversion Chart and my Shot Conversion Chart!
